- An all-black LAMY Safari fountain pen filled with a mix of water, Platinum carbon black, and inkjet printer ink.
- A blank sheet of A4, folded in half three times.
- My passport.
- A fully loaded Secrid card carrier.
- A really nice rock. It has been in my pocket for a year. Don’t think about it.
- A dumb watch. (Casio W-59. Very small, light as a feather. Green LED-backlight LCD display. 50 metre water resist. Tough, within reason. Effectively infinite battery life.)
- A beta of the PinePhone Pro, equipped with dreemurrs archlinux.
- A USB drive containing all of my computers’ boot partitions and Archiso.
Why this specific formula for the fountain ink? Beautiful pen, by the way.
What do you use to manage the ISOs? Or did I misunderstand #7?
There is one ISO and three boot partitions.
First of all, I formatted the USB drive with one vfat partition. Then I copied the contents of the ISO over. That and some prodding in grub.conf is enough to get the ISO working, and there is a whole lot of extra space in the vfat partition.
The entire contents of all of my computers’ hard drives is encrypted, but that leaves the boot partition. So I moved the boot partitions onto the vfat partition, each in a separate folder labelled by the host. Then, I added entries to grub.conf for each host. The USB drive boots and a boot menu appears with all of the ISO’s entries, plus a list of hosts. I choose the right host, then boot.
(I need the USB drive mounted before I can update the kernel or the microcode.)
O wow! This is totally not what I imagined. I imagined something like Ventoy. You literally made portable your boot partitions which without, the device is unbootable. Since it’s on a portable USB, you can essentially brick any device as easily as pulling the drive and cutting power. That’s ingenious!
And very dangerous. If anything happens to my USB drives and all of my many (many many many) backups, they are bricked to me too. My LUKS keys are on that USB drive. And the backups.
The same can be said for any drive, though. If the drive dies or the boot partition corrupts itself, we’re screwed. You seem to have backups of the boot partitions, so the likelihood of you losing all your backups is slim, but you make it easy for yourself to destroy the drive in the event of… let’s call it, an immediate need. And that’s what I find most ingenious.
Wait, so you need the USB in order to boot your PC? If you lose the USB, or it dies, you can no longer boot?
Essentially a yubi key for simple terms, yes?
IDK, do people use yubi keys to do LUKS?
Idk what lukz is. I’m just trying to simplify it so I understand
LUKS is full hard drive encryption. If you encrypt your entire hard drive with a yubi key, then lose the yubi key, and you have no backup, you’re shit outta luck. I encrypted my hard drives with a USB drive in a similar fashion. Then made backups of the USB drive, so that the scenario I describe wouldn’t happen. Hopefully. It’s kind of like horcruxes. If somebody steals them all, I become mortal again. Actually, though, if somebody steals them all, I lose all of the data on the hard drive.
deleted by creator
I only see a pen and part of a spiral notebook.
That’s a stock image. Better than I could have taken, and the pen is identical.
Okay, can you show us a writing sample? And what kind of ratio do you use when making that ink-mix?
30 water : 1 platinum carbon black : 5 yellow : 5 magenta is the mix for octarine.
But seriously, 30 water : 1 platinum carbon black : 10 printer ink is a good starting point for mixing. That is about how sensitive the mix is to each type of ink. Pure printer ink won’t ruin the pen, but it bleeds like a motherfucker. If you don’t care about the next five pieces of paper, though, you can do some pretty cool stuff with it.
I’ve heard good things about the LAMY. Do you find it’s as practical for daily use as say a ballpoint?
You kinda have to be an enthusiast to make a fountain pen an edc. They require more work, are more prone to damage and has the potential to spill all that lovely ink all over your nice clothes. I just keep mine at my desk. They’re a pleasure to write with given a quality make.
FWIW, I’ve never had a leak with a modern FP.
This, Lamy Vista FP at my desk, Zebra ballpoint in my bag.
I don’t use a Lamy (I use a Kaweco) but I can say that fountain pens are pretty nice if you like liquid and smooth writing. It’s not good on other materials other than paper like hard materials but for doing math and writing it’s a breeze.
Same practicality but it requires more care. If you want a daily use beater, go for Pentel energels or Sharpie S-Gels for some smooth writing and deep colors.
More practical, even, at least in my experience.
Ballpoints always jam on me, requiring about a kilonewton of force and about five minutes of blank scribbling to get it going again. Then, often, they leave big blotches of their sticky ink on the page when turning a corner.
The Safari does jam on occasion, but usually, a single well-placed drop of water is enough to get it going again. That depends on the ink you use though. If you use water and inkjet printer ink, it never jams, though it is a little bloody. 30 water : 1 platinum carbon black makes a lovely grey, but it jams so bad that I need to add a bit of inkjet printer ink to keep it running. Yeah, you’re definitely not supposed to water down that ink so much lol.
Computer scientist here. I also write with a fountain pen.
Me too, is this a thing?
Maybe, maybe not. Of the people I work with, only a handful even have a notebook. One other uses a Kaweco Sport FP. So for my sample, it’s a mixed bag.
you know it wasn’t till I enrolled in a physics degree that I met another human using a fountain pen. My first year prof.
Why are we so fucking weird? It’s obviously superior not having to exert normal force on the page to write (fuck you ball points) but why isn’t that more widespread.
because we have to fill or change cartridges, buy or make ink, clean the nibs, carry our pens carefully… too much effort just to write
ballpoints are efficient, sturdy and effortless. There are situations when we have to write/mark quickly while standing or outside under the weather
it’s not a question of “superiority” but practicality. when i’m writing or drawing on my desk i use a fountain pen. outside i carry a small zebra ballpoint
you have to do that to ballpoints to. Unless you use them disposably which there are disposable fountain pens too if you are a paper plates sort of person.
Felt tips share most of the advantages of ballpoints and fountain pens so are a defensible choice. They tend to work upside down too which fountain pens and ballpoints don’t. Although pencils, soapstone, or pressurised paint markers are better in those applications generally.
space pen works upside down and it’s a ballpoint
Ah yeah the felt is actually my preference for writing, because they never jam . . . (unless you leave the lid off like an idiot lol). But they’re not refillable and the tips aren’t replaceable. Usually. I have seen refillable felt tip markers. It’s definitely something I would be willing to try.
Yeah I had one ages back but you did need to replace the wicking material and tip periodically, filling also involved slowly infusing with a syringe and drawing needle.
In the end it was about as much hassle as a solid fountain pen and I couldn’t use archivists ink so I went back.
That pen isn’t inked, you can see right through the ink window
Yeah, I know. Like I told the other guy, it’s a stock image. An image of the real pen wouldn’t add anything except ink in the window, and I can’t take a better picture than whoever did the stock image. The ink in the window looks entirely unremarkable.
…
/me looks at ink in the window for five minutes with a bright light backlighting the window.
…
Yeah, the ink in there is entirely unremarkable. It’s just grey air bubbles and black water. IDK, you want a picture of the ink window anyway?
I’ve used the same Lamy Vista, the clear acrylic version of this pen so you can see the ink color, for maybe 18 years. Absolute workhorse.
OHHHH, I want that pen. I noticed it the week after I got my Safari, and was like, “NOOOOOOOOOOO!”
Especially with the converter with the red twist cap, it looks awesome.
Nice, I’ve got the OG PinePhone. It had some circuit board issues, but I loved helping at the ground floor. Is the PPPro good enough to daily drive yet?
I also keep a USB, but with my Keepass database so that it’s an offline carry. I keep 2 copies additional to that, 1 in my fire safe, and 1 in my mothers fire safe.
If you don’t mind living without a camera, yes. I think I might be able to get the camera working, but it hasn’t been a priority, because I never used my phone’s camera that much even before I switched to the PPPro.
Nice - I never really use my camera anyways, so that’s great to hear.
Now, though, people want a picture of the rock, and I’m like …shit.
@etuomaala For the record, if you posted multiple images, they’re not visible to me on Mastodon. When I’ve done the opposite, posting to Lemmy with a Mastodon account, multiple photos aren’t visible to the lemmy users either.
Oh, neat, Mastodon! I didn’t know for sure whether this was reaching Mastodon. I only posted the one image. I didn’t know I could post multiple images. Now, I know not to try, for compatibility reasons.
filled with a mix of water, Platinum carbon black, and inkjet printer ink
why do you choose 👆 solution over a commercial ink?
I like changing colours a lot.
i need more information :) you can change colours with inks too
Yeah, I was looking for a good CMYK fountain pen ink set. Nobody seems to make such a set. I could get a lot of half-solutions that would kind of work, but nothing beats the colour space coverage of a complement of CMY inks that were specifically designed to cover the whole colour space. They’re also about 10 times cheaper than fountain pen ink.
(And I got my printer ink for free on top of that from a print shop that just discontinued sales of their manual printer ink refills. The shop was Prink in Oulu, Finland. They probably still have these free refills.)
About six drops of ink and water the rest of the way gives you an entire cartridge of ink. This stuff is super concentrated.
I would use printer ink for the K too, but that’s too much of a crapshoot. Too often, the K is pigment-based, and that is likely to ruin a fountain pen. And it’s easy enough to find a good neutral black fountain pen ink. That is what the Platinum carbon black is for. It’s actually even more concentrated. Just one drop of it divided between two refills makes about a 50:50 grey that I can further modify with the printer ink. For less grey I have to go all the way down to one drop every four refills.
are you using distilled water or tap?
Oh fuck, should I use distilled water? lol hm… Well, I’ve used tap water and so far, so good… You think I need to use distilled water, @merde@sh.itjust.works ?
Where’s the rock? I want to see it.
The exact appearance of the really nice rock is a secret.
(sorry.)
