My search has been without results.

My “new” model remote with a Siri button keeps needing to be reset to control my infrared amplifier. Press and hold the Volume Down and TV button works, but it’s annoying when you want to change the volume whilst watching something and it doesn’t respond.

Firmware version is 0x83.

Anyone got any ideas what might be causing this?

  • bananaa@lemmy.world
    link
    fedilink
    arrow-up
    5
    arrow-down
    1
    ·
    4 months ago

    I’ve had this issue ever since I got one of the latest model a year ago. Need to reset it like once a month.

    A factory reset didn’t fix it :/

    And I have another Apple TV 4K which is one generation old that’s never had the problem.

  • Hux@lemmy.ml
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    4 months ago

    Does your amp support CEC? If so, you could make sure it is turned on for both ATV and the amp and just use the “HDMI” setting in the ATV settings.

    Also, just to confirm—in the ATV’s remote>volume control settings, do you have it set to control the receiver via IR?

    • Onno (VK6FLAB)@lemmy.radioOP
      link
      fedilink
      arrow-up
      1
      ·
      4 months ago

      The amplifier is not connected via HDMI and does not support CEC.

      The ATV is configured to use IR to control the amplifier.

      • borari@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        2
        arrow-down
        1
        ·
        4 months ago

        I’ve noticed this happens when I click volume up or down repeatedly a lot of times in rapid succession instead of just holding the button down. It hasn’t happened to me since I’ve tried to be conscientious about it, but ymmv.