- cross-posted to:
- slackernews@lemmy.world
- cross-posted to:
- slackernews@lemmy.world
I was looking for a new USB-c hub and came across this article. It’s an interesting write-up of what is on the inside of some popular options
I was looking for a new USB-c hub and came across this article. It’s an interesting write-up of what is on the inside of some popular options
Just imagine how easy things would have been if these 3000$+ computers had the necessary ports built into them.
3 usb type-c and two type-A ports, hdmi out, sd card reader should be bare minimum. A 3.5mm headset jack and collapsible rj45 or very least rj45 to usb adapter should also be included on machines intended for professional use.
Edit: for those complaining about having to disconnect multiple cables, sure you can buy a hub or dock if you want ease of use. But that would still be possible on a machine with its own ports. You don’t have to have a working dock to actually use the machine.
That would only solve some problems. My typical problem of not wanting to wire up 6 or 7 cables every time I switch between home-office and office would still go unsolved. Just plugging in a hub that already has keyboard, mouse, headset, monitors, and preferably even power attached is very nice to be actually flexible with the setup (also when quickly moving to a conference room and back).
You do realize that you can have both, right? Your laptop could have 6/7 ports but you could choose to use a usb-c hub for convenience. And, if you’re travelling or your hub breaks, you still have all the ports in your laptop.
Which is, why I said, it would only solve some problems (stronger highlight this time). Sure I can have both. But the hub would still be a problem if it broke after not even a year and/or burns my house down.
I have some small usb adapters I keep around for travel that work with all my laptops. They work fine in a pinch for my desk it my main hub goes down.
The problem is they stopped making the dumb click in docks that just connected right to the motherboard. I think they did this for “thin” and also those docks just worked too well, and basically never died. And you needed one from the laptop vendor because they were model specific. But man, the USBC crap is STILL not really an improvement.
deleted by creator
No thanks, I plug 2 cables into my MBP and get:
Contrast that with my old MBP that had “all the ports”, I’d have to plug multiple things in, I still had to use hubs, and it struggled to drive 2 monitors. No thanks.
But… but then you’d have to make them 0.01mm thicker.
That’s the excuse they feed you for sacrificing on usability, durability and also added expenses of buying more and more dongles.
Who decided that’s a work requirement? 2 usb c, 1 usb a, and hdmi is about all the average person needs for work use. Anything more than that and you should just get accessories. Usb hubs aren’t a new concept.