• lukstru@lemmy.worldOP
    link
    fedilink
    arrow-up
    10
    ·
    2 months ago

    Oh thanks, I didn’t know that. I thought it was an all purpose PCIe connector. Is there any way to find out whether it supports SSD storage? Is that way the dmidecode from my other comment (and basically saying that it doesn’t support storage?)

    • henfredemars
      link
      fedilink
      English
      arrow-up
      13
      ·
      2 months ago

      The most reliable way I know is to seek documentation for the board. It’s up there with PCI lanes in that the board designer will know what has been configured to work with that physical connector. This kind of info is definitely part of your motherboard documentation.

      I’m not familiar with dmidecode so unfortunately I cannot comment on that.

    • Creat@discuss.tchncs.de
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      2 months ago

      Scroll down a bit in this article. There’s a list of what each of the available keys are required to provide. A “key” in this context is basically a notch in a certain location, which then defines the meaning of the various pins of the connector. Some devices have multiple keys, as some of the specifications have a common subset. Like key A+E is common, because E provides almost everything that A does, so a device that only requires the common interfaces can work in both. Cars that rely on one of the exclusive interfaces will have the specific key of course. This A+E communication is often used for WiFi cards.

      Sockets always only have one key though, for obvious reasons.

      Edit: correction/clarification

    • Romkslrqusz@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      2 months ago

      Is there any way to find out whether it supports SSD storage?

      Have a look at the notch in the slot. SSDs will have either M key, B+M key, or very rarely just B key.

      WiFi modules are A, E, or A+E