The Pinecil is a good station, but you should also look for a larger bevel tip to use with it.
I’m using a flux syringe for easier application.
And solder does have a flux core but that quickly burns away and is only useful if you’re feeding solder directly into the joint. I place extra flux on the wire and pad and then load my tip up with solder
Thanks! I’m using a T3A station with the t245 handle and a 2.2mm bevel tip.
I replaced the solder on the mcpcb with 60/40 leaded solder and my temp is set to 355°C
And I always use flux ;)
undefined> my temp is set to 355°C
thanks for sharing that info ;-)
your blobs look so round and shiny… beautiful work
That’s pro stuff, way above my league :-) Seriously, my current soldering iron is a dumb piece of crap, I do want to upgrade to one of these eventually: https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/
I don’t think I’ve ever used (separate) flux; this is what you mean, right? Isn’t it supposed to be incorporated inside the solder nowadays?
The Pinecil is a good station, but you should also look for a larger bevel tip to use with it.
I’m using a flux syringe for easier application. And solder does have a flux core but that quickly burns away and is only useful if you’re feeding solder directly into the joint. I place extra flux on the wire and pad and then load my tip up with solder