• henfredemars
    link
    fedilink
    English
    arrow-up
    26
    ·
    6 months ago

    I’m impressed that the computer was usable with the failed CPU fan.

    • fuckwit_mcbumcrumble@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      24
      arrow-down
      1
      ·
      6 months ago

      Computers in 97 didn’t need much in the way of cooling. A large passive heatsink was plenty for those CPUs. They’re not the 300+ watt behemoths we have today.

      • Pacmanlives@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        edit-2
        6 months ago

        I really remember heatsinks being a thing on overclocked systems around that time frame and then once we got to P4 cpus the chilling towers appeared those things were massive

        • fuckwit_mcbumcrumble@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          13
          arrow-down
          2
          ·
          6 months ago

          The lower power 486s didn’t even need a heatsink. The P3 was the first to take a heasink resembling what we have today, but damn did the P4s need some serious cooling.

          It’s kinda funny how we think the 100 watts of a desktop P4 was insane when now the TDP of a high end laptop CPU is more than that.

          • Illecors@lemmy.cafe
            link
            fedilink
            English
            arrow-up
            3
            arrow-down
            1
            ·
            6 months ago

            It’s kinda funny how we think the 100 watts of a desktop P4 was insane when now the TDP of a high end laptop CPU is more than that.

            It really isn’t. Modern mobile cpus barely sip power.

            • mbfalzar@lemmy.dbzer0.com
              link
              fedilink
              arrow-up
              3
              ·
              edit-2
              6 months ago

              PL2 on a 14900T is 106W

              Edit: I’m an idiot, T series is low power socketed, not mobile. 14900HX has a TDP of 55W but boosts short term to 157W, which is still pretty ridiculous

            • I Cast Fist@programming.dev
              link
              fedilink
              arrow-up
              2
              arrow-down
              1
              ·
              6 months ago

              If you meant cell phones and tablets, that’s mostly due to the different architecture. RISC processors are super energy efficient, which also makes them much cooler to run.

              x86-64 is a CISC architecture, which tends to be much more power hungry. There are only a couple of very low power Celeron CPUs that work under 10W of TDP, while that’s very common among phones’ CPUs.

              • Trainguyrom@reddthat.com
                link
                fedilink
                English
                arrow-up
                3
                ·
                edit-2
                6 months ago

                x86-64 is a CISC architecture

                In many cases it’s actually RISC under the hood and uses an interpreter to translate the CISC commands and run them in the most optimal manner on the silicon

                ARM and RISC-V absolutely scale up to multi-hundred watt server CPUs quite easily. Just look at the Ampere systems you can rent from various VPSes for example

                The big benefit that ARM and RISC-V have is they have no established backwards compatibility to keep carrying technical debt forwards. ARM versions their instruction sets and software has to be released for given versions of ARM cores, and RISC-V is simply too new to have any significant technical debt on the instruction set side.

                Atom cores were notable for focusing the architecture on some instructions then other instructions would be a slog to execute, so they were really good at certain things and for desktop use (especially in the extremely budget machines they got shoved into) they were painful. Much like how eCores are now. They’re very carefully architected for power efficiency, and do their jobs extremely well, but an all eCore CPU is a slog for desktop use in many cases

            • fuckwit_mcbumcrumble@lemmy.dbzer0.com
              link
              fedilink
              arrow-up
              1
              ·
              6 months ago

              My 11950H (and all other “full power” Intel mobile CPUs) have a PL1 of >100 watts (109 for mine), and mine a PL2 of 139 watts. This laptop is about an inch thick.

              Nothing about this laptop sips power, I’ve gotten as bad as 30 minutes of battery life out of a 90 watt hour battery not playing games.

      • psud@aussie.zone
        link
        fedilink
        arrow-up
        8
        ·
        6 months ago

        I helped set up a friend’s “586” (about equivalent to a Pentium 1) and he had neglected to buy a heat sink or fan

        A hammer was a sufficient heat sink for the time it took to set up windows