Alliexpress search is weird. It tends to focus on similar items you’ve viewed, so once you find a product you get better searches related to that product for a short while.
Alliexpress search is weird. It tends to focus on similar items you’ve viewed, so once you find a product you get better searches related to that product for a short while.
Looks like you can find replacements on Alliexpress. https://www.aliexpress.us/item/3256805584512736.html
And why the Franklin Ace 1200 lost in court to Apple, copied Roms.
Full reverse engineering, using any plans or leaks from Sony would put them in legal trouble.
So for this job I used:
You can definitely do this type of work with a cheaper iron like a Pinecil or KSGER T12 of alliexpress.
Hot air station. Put down some tacky flux and kept it moving around the chips at about 380c.
Thanks! I’ve built a MGBC, a DMGC, a Funny playing GBA so I have some experience (though very much still an amateur).
Thanks! Getting them off was probably harder than soldering them on. It took quite a bit of heat to melt the existing solder. After that, line up the pins and tac it in place and use drag soldering with plenty of flux.
I think the laws need to clarify the difference between just hosting vs suggesting content. Tik Tok should be responsible since it suggested the dangerous video, unlike if it was just hosted on an AWS server.
I just always think of this clip https://youtu.be/R23GHBnDHYw?si=_RxuGSXlH7UzW7zB
Poltergeist
Could you imagine if land voted instead of people?
Well thanks for giving it a second look lol
Thanks!
Here is how I received the console.
Yeah that makes sense, Microsoft is definitely going to keep costs down and not switch out those reels. Based on the other info, these are 22uf 20%, so in spec with the others I’ve measured.
Luckily all the c17x are 0603 22uf, 20% caps. Thanks for pointing me to the image so I could compare it to the schematics. Now I have to go through and look for others. No idea how this could have even happened.
Good eye, I need to go over the entire board again and look for those. Combined with the other answer that help me with a revision that actually is labeled, you are right. It should be a 22uf 6.3 0603 decoupling cap.
No, for that you still need a real broadband adapter.
Sounds like Scientology