• 4 Posts
  • 18 Comments
Joined 1 year ago
cake
Cake day: June 28th, 2023

help-circle











  • dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
    dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
    dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
    dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
    dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
    dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
    dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
    dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
    dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
    dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
    dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
    dracut: memstrack is not available
    dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
    dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
    dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
    dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
    dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
    dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
    dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
    dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
    dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
    dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
    dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
    dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
    dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
    dracut: memstrack is not available
    dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
    dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
    dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
    dracut: *** Including module: systemd ***
    dracut: *** Including module: systemd-initrd ***
    dracut: *** Including module: i18n ***
    dracut: *** Including module: kernel-modules ***
    dracut: *** Including module: kernel-modules-extra ***
    dracut: *** Including module: rootfs-block ***
    dracut: *** Including module: terminfo ***
    dracut: *** Including module: udev-rules ***
    dracut: Skipping udev rule: 40-redhat.rules
    dracut: Skipping udev rule: 50-firmware.rules
    dracut: Skipping udev rule: 50-udev.rules
    dracut: Skipping udev rule: 91-permissions.rules
    dracut: Skipping udev rule: 80-drivers-modprobe.rules
    dracut: Skipping udev rule: 70-persistent-net.rules
    dracut: *** Including module: dracut-systemd ***
    dracut: *** Including module: usrmount ***
    dracut: *** Including module: base ***
    dracut: *** Including module: fs-lib ***
    dracut: *** Including module: shutdown ***
    dracut: *** Including modules done ***
    dracut: *** Installing kernel module dependencies ***
    dracut: *** Installing kernel module dependencies done ***
    dracut: *** Resolving executable dependencies ***
    dracut: *** Resolving executable dependencies done ***
    dracut: *** Hardlinking files ***
    dracut: Mode:                     real
    dracut: Method:                   memcmp
    dracut: Files:                    780
    dracut: Linked:                   2 files
    dracut: Compared:                 0 xattrs
    dracut: Compared:                 38 files
    dracut: Saved:                    356.65 KiB
    dracut: Duration:                 0.010006 seconds
    dracut: *** Hardlinking files done ***
    dracut: *** Generating early-microcode cpio image ***
    dracut: *** Store current command line parameters ***
    dracut: *** Stripping files ***
    dracut: *** Stripping files done ***
    dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' ***
    dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' done ***
    (4/5) Check if user should be informed about rebooting after certain system package upgrades.
    (5/5) Checking which packages need to be rebuilt
    

  • oiram15@lemmy.sdf.orgOPtoLinux@lemmy.mlI am desperate. Linux is not booting
    link
    fedilink
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    10 months ago

    I updated only the kernel and I got the following:

    :: kernel-install installing kernel 6.4.12-arch1-1
    dracut: Executing: /usr/bin/dracut --no-hostonly --force /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback 6.4.12-arch1-1
    dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
    dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
    dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
    dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
    dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
    dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
    dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
    dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
    dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
    dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
    dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
    dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
    dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
    dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
    dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
    dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
    dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
    dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
    dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
    dracut: dracut module 'nbd' depends on 'network', which can't be installed
    dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
    dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
    dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
    dracut: memstrack is not available
    dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
    dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
    dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
    dracut: *** Including module: systemd ***
    dracut: *** Including module: systemd-initrd ***
    dracut: *** Including module: modsign ***
    dracut: *** Including module: i18n ***
    dracut: *** Including module: btrfs ***
    dracut: *** Including module: crypt ***
    dracut: *** Including module: dm ***
    dracut: Skipping udev rule: 64-device-mapper.rules
    dracut: Skipping udev rule: 60-persistent-storage-dm.rules
    dracut: Skipping udev rule: 55-dm.rules
    dracut: *** Including module: kernel-modules ***
    dracut: *** Including module: kernel-modules-extra ***
    dracut: *** Including module: lvm ***
    dracut: Skipping udev rule: 64-device-mapper.rules
    dracut: Skipping udev rule: 56-lvm.rules
    dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
    dracut: *** Including module: mdraid ***
    dracut: Skipping udev rule: 64-md-raid.rules
    dracut: *** Including module: nvdimm ***
    dracut: *** Including module: qemu ***
    dracut: *** Including module: qemu-net ***
    dracut: *** Including module: lunmask ***
    dracut: *** Including module: resume ***
    dracut: *** Including module: rootfs-block ***
    dracut: *** Including module: terminfo ***
    dracut: *** Including module: udev-rules ***
    dracut: Skipping udev rule: 40-redhat.rules
    dracut: Skipping udev rule: 50-firmware.rules
    dracut: Skipping udev rule: 50-udev.rules
    dracut: Skipping udev rule: 91-permissions.rules
    dracut: Skipping udev rule: 80-drivers-modprobe.rules
    dracut: *** Including module: virtiofs ***
    dracut: *** Including module: dracut-systemd ***
    dracut: *** Including module: usrmount ***
    dracut: *** Including module: base ***
    dracut: *** Including module: fs-lib ***
    dracut: *** Including module: shutdown ***
    dracut: *** Including modules done ***
    dracut: *** Installing kernel module dependencies ***
    dracut: *** Installing kernel module dependencies done ***
    dracut: *** Resolving executable dependencies ***
    dracut: *** Resolving executable dependencies done ***
    dracut: *** Hardlinking files ***
    dracut: Mode:                     real
    dracut: Method:                   memcmp
    dracut: Files:                    1987
    dracut: Linked:                   8 files
    dracut: Compared:                 0 xattrs
    dracut: Compared:                 449 files
    dracut: Saved:                    1.42 MiB
    dracut: Duration:                 0.022128 seconds
    dracut: *** Hardlinking files done ***
    dracut: *** Generating early-microcode cpio image ***
    dracut: *** Constructing AuthenticAMD.bin ***
    dracut: *** Store current command line parameters ***
    dracut: *** Stripping files ***
    dracut: *** Stripping files done ***
    dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' ***
    dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' done ***
    dracut: Executing: /usr/bin/dracut --hostonly --no-hostonly-cmdline -f /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd 6.4.12-arch1-1
    

    (Continues in the second comment)



  • oiram15@lemmy.sdf.orgOPtoLinux@lemmy.mlI am desperate. Linux is not booting
    link
    fedilink
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    10 months ago

    I have already wiped everything, so no logs… The only way to have it booting is to install EndeavourOS using the offline installer, which is using kernel 6.4.8. There is an option to install the LTS kernel alongside. So the system is booting with 6.4.8, but after updating, neither the new 6.4.12, or the LTS, which is 6.2, doesn’t boot. I haven’t tried booting with the LTS kernel before updating, to see if the same kernel is working before and after or not. I will try to reinstall it using the offline installer and then try to gather some logs after updating.


  • I found it!

    [liveuser@eos-2023.08.05 ~]$ cat /mnt/efi/loader/entries/02ef85f9edc146d598502c1b296ff64a-6.4.12-arch1-1.conf 
    # Boot Loader Specification type#1 entry
    # File created by /etc/kernel/install.d/90-loaderentry.install (systemd 254.1-1-arch)
    title      EndeavourOS
    version    6.4.12-arch1-1
    machine-id 02ef85f9edc146d598502c1b296ff64a
    sort-key   endeavouros-6.4.12-arch1-1
    options    nvme_load=YES nowatchdog rw root=UUID=9ae3c50f-be08-4594-ac30-2d094375868d systemd.machine_id=02ef85f9edc146d598502c1b296ff64a
    linux      /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/linux
    initrd     /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/initrd
    
    



  • oiram15@lemmy.sdf.orgOPtoLinux@lemmy.mlI am desperate. Linux is not booting
    link
    fedilink
    arrow-up
    5
    arrow-down
    1
    ·
    edit-2
    10 months ago
    [root@EndeavourOS /]# blkid
    /dev/nvme0n1p1: UUID="6903-7FA3" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="86a0a714-815f-45db-ad0e-9eba16861903"
    /dev/nvme0n1p2: LABEL="endeavouros" UUID="9ae3c50f-be08-4594-ac30-2d094375868d" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="endeavouros" PARTUUID="9b52162c-a4bf-4e5e-8096-bb7f144c481a"
    /dev/loop0: BLOCK_SIZE="1048576" TYPE="squashfs"
    /dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="ARCHISO_EFI" LABEL="ARCHISO_EFI" UUID="6121-B369" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="1bdb3cc0-02"
    /dev/sda1: BLOCK_SIZE="2048" UUID="2023-08-05-13-57-43-00" LABEL="EOS_202308" TYPE="iso9660" PARTUUID="1bdb3cc0-01"
    [root@EndeavourOS /]# sudo cat /etc/fstab 
    # /etc/fstab: static file system information.
    #
    # Use 'blkid' to print the universally unique identifier for a device; this may
    # be used with UUID= as a more robust way to name devices that works even if
    # disks are added and removed. See fstab(5).
    #
    #                      
    UUID=6903-7FA3                            /efi           vfat    defaults,noatime 0 2
    UUID=9ae3c50f-be08-4594-ac30-2d094375868d /              ext4    defaults,noatime 0 1
    tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0