The switches don’t have to control the lights they are wired to. I have Inovelli z-wave switches, and on these you can disable the relay. So the switch can still send out commands/scenes on the network but the relay is always on.

Then you would put in a relay unit in the electrical box of the lights or if you have enough room in with the switches. Then setup the switches to control their respective sets of lights.

Might even be a switch out there that lets you disconnect the relay from the buttons on the switch but still control the relay which would cut down on the device count.

It might be the least effective especially for those not in swing states, but it certainly isn’t the least important.

And as far as “not a democracy” the NPVIC isn’t that many states away from effectively rendering the problems with the electoral college moot. Certainly a steep uphill battle though.

If voters actually turned out for primaries/elections there would be much better candidates. So your argument becomes “nobody else does it, and because of that the system is broken, and so I won’t do it either”.

It seems like people get caught up in the media hype on the presidential election and forget that some of the most important change needs to start from the bottom up, and a couple of. votes can make a huge difference in State levels, and congressional/senate elections. A president is worthless without a Congress/senate passing laws that actually matter.

Just look at what Minnesota has been able to with voter reform in the last year with their very narrow trifecta. I.e law went into effect this year that allows residents to sign up to automatically receive absentee ballots for every election/primary in their area. A minor improvement, but an important one. Guaranteed that there will be folks that wouldn’t bother to vote on non-presidential elections that will be now.

They also added a “right to be absent from work to vote” which gives Minnesotans the ability to vote without using any sort of vacation/leave time without losing pay. Full list of other rather import changes here

Things like that can snowball into a larger shift at the state level.

The state has no need for you to legitimize them. Even if the system is weighted against you every vote still has power, and the only thing that not voting accomplishes is sending a message that you are okay with the system as it is. There are plenty of politicians out there that want change to happen, and they can’t do it without enough votes behind them.

But those aren’t mutually exclusive things. Voting for the Dems doesn’t prevent you from doing those other things in the meantime.

If you only have two real choices that will affect the outcome and one of them is better than the other, voting for neither of them just makes things harder for those that would have made it slightly better. More compromises have to be made and that means the situation can’t improve.

I see constant posts about how Trump splitting their base is going to mean the end of the Republican party but that seems very short sighted. It is a simple matter of natural selection, and in a two party system only two parties will ever exist. It also inherently gravitates to very close races between those parties. Any split of the Republican party might cause a term or two of chaos, but it is just a matter of time before something fills the vacuum and balance is restored.

Each party would prefer to move further towards their end of the spectrum, but they are forced to move their values (or choose more centrist candidates) until they have enough of a majority to win.

Gerrymandering, the electoral college, what’s left of the judicial branch, apathetic voters, parasitic third parties, and wedge issues have allowed the Republicans to shift further right while maintaining their power. The only possible response to that from the Dems is to also shift right as well. If they didn’t the Republicans would just end up with trifectas or super majorities.

Trump was also able to shift racist/authoritarian/nationalist policies much further right by shifting his fiscal policies further left than what Republicans normally would do. His whole campaign was based on deficit spending (tax cuts without any real cost cutting, stimulus COVID spending, etc), public works (multi billion dollar worthless walls), and his focus on blue collar workers (not directly supporting unions but he pushed anti China + US manufacturing boosts).

Every vote for a third party is one less vote that the Republicans need to gain, which is a little more right that they can slide and maintain power, and since natural selection links the two parties it is also a little further right that the Democrats have to slide to maintain their power as well.

If you want to shift things left voting third-party won’t do it. Third parties have no power to make changes and never will in our current system.

Voting for the only party that has a chance of winning and is willing to make voting reforms to improve that system is the only hope of shifting the parties to the left where the actual political center of the country lies.

Voting for anyone else is illogical and won’t prevent this genocide. Protests, and organizations can maybe help in the short term to push the Democrats to change course but it also disenfranchises more voters to not show up, and pushes more to vote for third parties… And so the snowball tumbles down the hill to the right gaining momentum leaving us with frankly no good choice.

We asked our Dell sales guy this question years ago now, when they had been removed one year and quickly added back the next year.

They are there mostly for government builds, and other places with high security requirements. Usually the requirement is that they need to prevent any unauthorized USB devices from being plugged in. With the PS2 m&k ports they can disable the USB ports entirely in the BIOS.

This was a separate outage unrelated to CrowdStrike a few hours earlier that took down a couple of airlines as well.

A majority of the VMs in the Azure CentralUS datacenter went down due to some sort of backend storage issue.

Edit: I guess I should have read the article they do say CrowdStrike. They seem to be implying that they were one event when the cloud services outage was earlier and unrelated. I had heard about grounded flights during the first outage as well. So they likely are combining the two events here.

I would think most wifi jamming is just deauth attacks. It is much easier to just channel hop, enumerate clients, and send them deauthentication packets.

This way you don’t need a particularly powerful radio/antenna, any laptop/hacking tool with Wi-Fi is all you need. There are scripts out there that automate the whole thing, so almost no deep knowledge of wifi protocols are required.

WPA3 has protected management frames to protect against this but most IoT cameras probably don’t support WPA3 yet.

Updates for CrowdStike are pushed out automatically outside of any OS patching.

You can setup n-1/n-2 version policies to keep your production agent versions behind pre-prod, but other posts have mentioned that it got pushed out to all versions at once. Like a signature update vs an agent update that follows the policies.

This is likely something like a FIDO token/passwordless setup of some sort (i.e. Windows Hello).

The thumbprint would just unlock the hardware device, so the thumbprint itself wouldn’t need to be transmitted to your credit issuer. This gives you full two factor authentication of your identity because you need the hardware device (something you have) and your biometric (something you are). They also often allow pins (something you know) instead of biometrics as the second factor.

I believe so. The package descriptions for most of the ZFS packages in Ubuntu mention OpenZFS, so it certainly appears that way.

You can still create pools that are compatible with Oracle Solaris, you just have to set the pool version to 28 or older when you create it and obviously don’t update it. That will prevent you from using any of the newer features that have been added since the fork.

Well worse than that, Oracle closed sourced ZFS, so OpenZFS was forced to become a fork, and they are no longer compatible with each other.

As for GPL the CDDL license that ZFS uses made sure that code contributions attribute copyright to the project owners, which means they can change the license as they please without having to track down contributors.

You would think with their investments in Oracle Linux and btrfs they would welcome that license change, but apparently they need excuses to keep putting money into Solaris, and their Oracle ZFS appliances instead.

One nice thing about KDE compared to most of the other DEs is that the window manager (kwin) is separate from the underlying components, and it can be replaced!

There are many walkthroughs like this one out there: https://github.com/heckelson/i3-and-kde-plasma

You get i3 for tiling window management but you still get to use KDE’s system settings to do configuration like display settings, themes keyboard shortcuts, etc, just like you did before. You can also pick and choose which parts of the KDE desktop you want to keep (menu, krunner, etc)

Since i3 is just a window manager and is lacking all of that system level stuff it really rounds out i3 to feel like a full DE instead of having to piece together other tools to do those things.

August 15th. https://discourse.ubuntu.com/t/noble-numbat-release-schedule/35649

It’s presumably to give you legal ground to sue if some corporation scrapes Lemmy content and uses it to train AI, or whatever other commercial purpose.

Hopefully if enough people do it they would consider the dataset too risky to use. They could try and parse out comments that have that license statement but if any get missed somehow they open themselves up to lawsuits.

That would force them to instead pay for content from somewhere that has a EULA forcing the users to hand over copyright regardless of what they put in their posts (i.e. Reddit).

Assuming you mean hot plugged devices (thumb drives and external drives) KDE mounts them under /media

If you are expecting them to auto mount, KDE distros often don’t have that enabled by default. Though I think Kubuntu has that enabled by default now so maybe that has changed. Go to System Settings -> Hardware -> Removable Devices to adjust the automount settings defaults and per drive settings.

If you don’t have automount enabled you probably will need to browse to them in Dolphin once to get KDE to mount the drive first.

There is a free fan made remake of the shooter. https://totemarts.games/games/renegade-x/

Unfortunately while EA seems fine with them distributing this as long as it is free, they won’t allow them to put it on Steam.

I haven’t played it in a couple of years so I don’t know if there are still active servers but it is a very good remake.

That probably would work well for those closer to the equator.

But for those in the 100 minutes zone of this map that would mean going to work at 6:30am in the summer (assuming we are using civil twilight as “sunrise”), and 9:30AM in the winter which is much more of a swing than daylight savings puts on us, but at least it is a gradual one.

For those above the Arctic Circle, they just work 24/7 for a couple of weeks in the summer but get a similar time off in the winter ;)

I recently bought a used switch from eBay which didn’t come with Joy-Cons as a gift for someone else. Took my OLED’s Joy-Cons and popped them on to test while I was waiting for the new Joy-Cons to arrive…

Well little did I know there was something sticky that had gotten on the contacts of this used switch, which then transferred to the Joy-Cons. I of course plugged them back into my OLED trying to figure out what was going on and transferred enough of whatever it was to my OLED to start causing problems as well.

Long story short it doesn’t take much to break that contact.

If you have an original switch and the right tools to open it up (needs a tri-wing screw driver), it is pretty easy to open it up, remove the contacts from the rail and thoroughly clean them. Worked perfectly to get the used switch back to brand new.

Of course don’t forget to do the same on the contacts of the Joy-Cons They need the same tri-wing screwdriver to open.

The OLED is a bit more of a PITA to get the rails out, so if you have an OLED or don’t have the tools to open your original you can make a makeshift cleaner like this person did (sorry about the reddit link). Joy-Con Rail Contact Cleaning Tool

I used a much smaller cable tie so that I could fit some isopropyl dipped gauze around the tip to get into the contacts (power off your switch entirely first!!!).

Careful on the Joy-Cons if you try to use something like that tool. The Joy-Cons are the spring side of the contact so you could easily bend them and make things worse.

If you have problems with stick drift and feel comfortable opening them up, you can get replacement sticks on eBay for $5-6 a piece.