minnix@lemux.minnix.devM to Home Assistant@lemux.minnix.devEnglish · 10 months agoESPHome compatible "Smart Powermeter" supports up to 6 CT clampswww.cnx-software.comexternal-linkmessage-square3fedilinkarrow-up114arrow-down10
arrow-up114arrow-down1external-linkESPHome compatible "Smart Powermeter" supports up to 6 CT clampswww.cnx-software.comminnix@lemux.minnix.devM to Home Assistant@lemux.minnix.devEnglish · 10 months agomessage-square3fedilink
minus-squareAbidingOhmsLaw@lemmy.mllinkfedilinkEnglisharrow-up2·edit-210 months agoWill the work in the US, we have split phase 120v/240v power to homes, so each CT transformer will be on a 120v circuit. i.e. Can the yaml file be set to calculate using 120v rather than 230v? https://upload.wikimedia.org/wikipedia/commons/2/29/Split_phase2.png
minus-squareminnix@lemux.minnix.devOPMlinkfedilinkEnglisharrow-up1·10 months agoYes, all of those calculations can be set within esphome.
Will the work in the US, we have split phase 120v/240v power to homes, so each CT transformer will be on a 120v circuit. i.e. Can the yaml file be set to calculate using 120v rather than 230v?
https://upload.wikimedia.org/wikipedia/commons/2/29/Split_phase2.png
Yes, all of those calculations can be set within esphome.