This is the second time this has happened. It looks like it added part of the model on to the side. Is it my slicer? I’m using a Creality Halot Mage, and Chitubox 1.9.5 because that is the only slicer I’ve gotten to work on Fedora that supports my printer that I’ve found. I’m completely new to all things 3d printing. This is my first printer and that is my sixth print in the picture.

  • Warl0k3@lemmy.worldEnglish
    5·
    10 months ago

    Did you recently replace the screen? It looks like there might be light leaking in around the edges, and that you should either replace the FEP because its getting too loose or increase your peel height

  • FiveMacs@lemmy.caEnglish
    2·
    10 months ago

    what the heck IS happening here? The scratches, the extra chunk…it’s possessed

    • brian@sh.itjust.worksEnglish
      0·
      10 months ago

      Not the OP, but what do you mean by this? I feel there’s an implication that it should be laid out a different way?

      • InEnduringGrowStrong@sh.itjust.works@sh.itjust.worksEnglish
        2·
        10 months ago

        Contrary to fdm printing, resin printing doesn’t like large xy cross-sections because that means huge forces between the part and the fep.
        This suction and pulling can lead to delamination of layers.

        You typically want to angle parts and spam a bunch of supports. Which really is usually the opposite of what you wanna do on an fdm printer.