When I cruise around the net I sometimes use Mullvad as an ass-guard.
When I connect to my own server I have SSH, and if I ever need to access a local port I use port redirect over the SSH tunnel.
As a backup of a backup, if I am at a site that blocks access to remotes on port 22, I have sslh running on port 443 in front of my nginx, intercepting TLS for nginx, SSH and openVPN (running in docker) all on the one port, so I have options…
I wanna host everything myself, but also love tailscale, so I’m using tailscale with headscale… It’s so convenient to not open up ports, especially since I don’t have a static IP
I have a domain on cloudflare to map internal IPs/services and use wireguard to reach the network. Tried Tailscale and Zerotier, there was a problem on some devices when switching from wifi to internet which was breaking internet access, switched to Wireguard and now i’m happy.
I use Twingate, saw it in a network chuck video and setup was easy. At one point I had a VPN server running on a raspberry pi but never really used it just like I don’t really use twingate that much. I may eventually setup wireguard on my cloud server so I’m the one hosting everything but for now it’s not something I use so it’s one of those when I get around to it.
Wireguard because my consumer router has it built-in.
Pretty simple answer: Wireguard.
Why? It’s the fastest of them all, works on almost all devices you can imagine, does not rely on any 3rd party like Tailscale with OICD or other IdP. Tailscale has its use when you are behind CGNAT and don’t want to VPS a Wireguard server somewhere with a static IP, other than that, it has no use in my opinion. I’m fully aware that I get downvotes from people who praise the zero trust principals of Tailscale and all the rest, but they always forget that you can do zero trust since decades with any network equipment (VXLAN) and add Wireguard to the mix. You can even run Wireguard in your local network to encrypt unencryptable traffic like NFS.
Check back in a few hours /u/Silencer306, this comment will have a few if not many downvotes.
If you can use Wireguard that is probably a good solution but I would still prefer to have a cloud proxy in front of it because my network can not handle all the attacks and wouldn’t even notice some of them if you use just Wireguard.
I use CF Tunnels firstly because of all the protections and traffic analysis it does, and secondly, because even DDNS wouldn’t work on my network.
excellent reply
Tailscale has its use when you are behind CGNAT and don’t want to VPS a Wireguard server somewhere with a static IP, other than that, it has no use in my opinion. I’m fully aware that I get downvotes from people who praise the zero trust principals of Tailscale and all the rest, but they always forget that you can do zero trust since decades with any network equipment (VXLAN) and add Wireguard to the mix.
People just forget that all Tailscale is is a fancy GUI for managing Wireguard. That’s it.
Wireguard lacks a lot of user management features so you need a service like Tailscale to handle that, but everything zerotier does is something you can already do in wireguard, just simplified.
For work, Tailscale between vps and server. It works like cloudflare tunnels but doesn’t have the issues with the TOS excluding media streaming etc.
Keeps the internal server relatively safe and we can stream media/serve media content.
Cloudflare is our registrar and dns provider.
Yes.
I use all three for different purposes.
It all depends on what my requirements for self hosting some are.
To access my stuff at home and elsewhere from anywhere I use Twingate. I don’t expose anything from my home via Cloudflare. I do use cloudflare WAFs for stuff on my VPSs.
I just use the UDM-SE App (Teleport). I can connect on demand and get to all of my services, get adblocking while I’m out and about. Teleport on ubiquiti is just wireguard renamed.
I don’t need to expose any services from my home network, because I’m the only one using them. If It wasn’t just me, I’d just have them download the wifiman app, send them a teleport link and boom…they’re in on the local network. Exposing “services” for a convenience factor is just too much of a security risk for myself.
I host all of my websites on github (free) and leverage vercel for CI/CD pipelines (again, free). Domains are the only thing public and that I pay for. (local dns reasons for lets encrypt certs) and for my public websites not associated with my home infrastructure.
Started with exposed domains with NPM, SSL certificates, etc. Tried out CloudFlare tunnels and wasn’t satisfied, so I landed on Tailscale. Dead simple to set up and use. Fast, secure, what more to ask for?
For starters the CF tunnel means your service is publicly accessible and Tailscale or Wireguard it won’t be.
I have been experimenting with Tailscale and it’s just not fast enough for our needs. It’s insanely simple to setup and get guys going on it, but in the end we couldn’t get more than ~20mbit or so, if even that. Looking forward to giving Netmaker a shot (Still a Wireguard Kernel as Tailscale), but we need to be able to switch allowed access between different groups of external users throughout the day. Ideally in a way that only requires a click or two, or can be somehow automated into a click or two.
I started with Tailscale. My main use in the beginning was to have access to my Home Assistant when I was out, and for that it was perfect.
Then I started to want access to files on my NAS without using Synology’s Quickconnect after they had a security scare. Tailscale was fine for this too.
But when I began game streaming from my home PC, that’s when Tailscale stopped working for me. Latency spikes, poor bandwidth, it just wasn’t up to the task.
Now I have wireguard set up on my Opnsense router, and it’s perfect. My upload speeds are max 20Mbps due to my internet service, but I can reliably stream at around 15Mbps with latency of about 25ms max.
It’s definitely harder to manage and maintain than Tailscale was, and I’ve ended up doing a bunch of other stuff like buying a domain so I can have SSL for my other hosted services (which have grown since I started, naturally!), but for performance it’s ideal.
I’d probably start with something like Tailscale or Zerotier because they’re easy to set up and deploy. If that meets your needs, no need to look elsewhere. I considered CF tunnels but I have one already set up for Google Home to interact with Home Assistant and I find it hard to understand so the idea of using it more widely didn’t seem smart. I’m already worrying about the day I have to update the domain name from the current DuckDNS one to my paid for domain…
Wireguard.
Because I would like to self-host everything myself, so why should I use another 3rd party service?