I do not know whether I should ask here. Even though I am still thinking about turning my not-used RPI Zero into a router. Now I have an old Archer C6 v2 with OpenWRT and sometimes happen router turns off after connecting the PC. I know it is possible to do it, but I wonder whether RPI would be able to hold the traffic better than the Archer. I should point out, that traffic means a Proxmox server with 2 Linux VMs and 4 PVEs, a television, and 4 Wi-Fi connections. I am thinking about configuring OPNsense on the RPI as well. Would it work or do you have better ideas?

    • d-cent@alien.topBEnglish
      1·
      1 year ago

      This is the way to go. If anyone has suggestions on one, I would love to see them. Most only have 1 nic. A lot of the ones with 2 have a bunch of unnecessary extra IO and cost alot.

  • Canonip@alien.topBEnglish
    2·
    1 year ago

    Nope. Get yourself one of those N100 things from topton. They are cheap and work well with proxmox/opnsense.

    And waaaaaaay more powerful.

  • Still-Snow-3743@alien.topBEnglish
    2·
    1 year ago

    Nah, even if it didnt have throughput issues it would be far more effort than necessary to set up.

    My recomendation, get a used Linksys WRT1200AC and put openwrt on it. It’s basically as if they put a raspberry pi 3 into a linksys router, it has much more processing and memory than most cheap routers and you can get it used for about $50.

  • kamaradski@alien.topBEnglish
    1·
    1 year ago

    might work, but not for a lot of throughput.

    1. CPU is not powerful enough, especially if you also dealing with encryption

    2. You have only 1 NIC on these, which you will need to share for external/internal with some vlan config or virtualization (already cuts bandwidth potential in half

    3. a work around for #2 is to use a USB NIC, which will put you in a bad spot with issue #1 again.

    Get an Intel NUC, or ChromeBox or something like that. Or you can even run it virtualized inside Proxmox on another machine in your homelab. This is what i do, and it sits with a bunch of LXC’s on the same machine (haproxy, UnifiController, CloudflareTunnel). Basically, all my network contollers on the same machine neatly in separate containers. Powered by a super cheap Celeron G3950 and 8GB RAM. food for thought.

    • Pretend_Depth3892@alien.topOPBEnglish
      1·
      1 year ago

      Yeah, I have one old server with a two-core Intel processor, so I was thinking about using it instead of the RPI, but IMO it is quite overkill…dunno what to use the remaining power for

  • IlTossico@alien.topBEnglish
    1·
    1 year ago

    RPI zero? Without Ethernet ports? How? Just that is enough of a deal. Without thinking about the cpu power and the fact that pfsense, the free version, doesn’t work on arm.