I’m not much of a networking person. But I understand the importance of different vlans. Currently I have 4 separate vlans that I change my PCs ip address to access If I buy a four-port nic and assign each port to a separate lan does the computer know which port to use to access the appropriate traffic or is there something else I should be doing instead?
Only the main network has access to the outside internet and it would be nice to have one system that could access everything. Or even allow my email server access to different vlans to send out alerts.
- Main network
- NVR & Cameras
- KVM & IPMI
- Various equipment
My main system is normally powered off so I wouldn’t see this as an added security risk But it would definitely save some time when I sit down to check things out
You change your IP address only and you have access to different devices?
Or you change your IP address and plug into a different switchport / switch / device?
If its the first, you’re not running separate vlans, you’re running separate subnets over the same layer2 network.
I reassign it in the router to the proper vlan and set my IP accordingly. My switches have layer 3 functions but I just treat them as their own lan
Re-assign it? Whats it? Reassign a port to the proper VLAN?
So are you plugged straight into your router, with switches plugged into other router ports?
If you have a diagram, it would make it easier to understand your network.