Looking to get a NAS but don’t want to spend too much starting out. I have the opportunity to buy a used custom built NAS with much better specs than what I would probably be able to get from something like a synology NAS. It seems like a really good deal but I’m not sure how difficult/time-consuming it will be to configure for my use case or if it will be better to stick to synology software. Also, is the software to use the NAS after configuration not user friendly or well supported?

My use case is to store photos and videos and device backups from time machine for my mac. I’d also like to be able to remotely access the data over the internet.

  • caspinprince@alien.topOPB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Thanks for the super helpful reply! I guess my main debate is since the custom NAS is built with a decent cpu and includes 16gb RAM, SSD and storage drives its much more value. I’ve worked a little with linux before so I’m not against setting it up myself. But would it be as easy to use as an actual branded NAS for family members backing stuff up that aren’t great with tech?

    • marc45ca@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      yes and off-the-shelf unit is great for the family who aren’t that tech literate - it can just sit on the shelf and do it’s thing but you will still need to monitor and update it.

      That CPU in the custom nas could also be more powerful than what you get in the off-the-shelf providing you with more flexibility.

      It could start off as a nas today and tomorrow you to turn it into a virtualised server with the NAS software running as virtual machine.

      Or you could find that you’re shifting very large files around and need 10GBe ethernet and high performace which could start to choke a Synology or QNAP NAS with an ARM processor.

    • DaGhostDS@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      You could also run Xpenology on your custom NAS, which is a bootloader for Synology DSM os. Other alternative is TrueNAS, Unraid or OpenMediaVault (or any other I might not know).

      QNAP nas are fine too, but I disliked the backdoor they had pre-2021… Terramaster are terrible chinese knockoff though, hardware is ok but the OS need to be flashed.

      • Routine_Ad7935@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I installed this on a Thecus N5810, it worked good, but never put it into production, bought a Synology DS1522+. Anyone remember Thecus? Stable hardware with nice buildin UPS and the most awful software and stability you can get.

        • DaGhostDS@alien.topB
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I don’t think I ever heard of Thecus… are they still around? Website is online but I couldn’t find any vendor with any model in stock… pretty strange.

          Worse NAS goes to Iomega StorCenter ix2… Probably the worst device I ever worked with, Lenovo pulled the plug on the company in 2018, which existed since the 80s.

          • Routine_Ad7935@alien.topB
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I believe the company is dead, no updates since many years, one of the reasons I replaced the Thecus with a current Synology, primary because of active backup for business and for O365.

            • DaGhostDS@alien.topB
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I do… We still have users who have them in their office at work and an Addonic raid array from early 2000s… I need to check it next week lol.

    • Objective-Outcome284@alien.topB
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      If you’re starting from scratch and have a requirement for other less tech-literate family members to use the device, I’d typically advise to start off with an appliance like a Synology. Myself, I started with QNAP which tend to have better hardware but questionable firmware. Once setup the other users didn’t even need to know what it was or how it worked. Probably go with a mid-range 4-bay device. NASCompares and SpaceRex YouTube channels can provide reviews and comparisons as well as examples of what device in what tier.

      Once you have a device up and running you can explore your needs over time as things mature. Do you want to run other services? What’s your rate of storage growth? etc etc.

      If you happen to have spare hardware just laying around that could be used in a self-build then by all means have a crack and setup a trial system. If you need to buy disks then that doesn’t matter as you’ll need them for an appliance anyway - just look at compatibility first (WD Red Plus, Seagate IronWolf etc) and make sure they’re CMR not SMR.

      If I were starting out now I’d have a play with Xpenology (to see if you’d like what Synology offers), Open Media Vault, Unraid, and TrueNAS Scale. These systems are so much more usable than when I started this journey over 20 years ago. It’ll be all good.