Hi y’all,

I’m getting a new house built and builder has asked me if I want cat 5 connections installed. I am thinking of having these cat 5 ports installed where the tv’s will be and where my office will be. Wifi for rest of the devices. It’s a three story house. Would cat5 wiring be run separately from each port to a central location in the basement? Im guessing that my main internet line to the house will come into basement.

Would I install modem in the basement and individually connect all these cat5 wires into the modem? Do I require anything else from the builder side? Does a wifi booster need a cat5 port? Anything else you guys foresee I should get before the drywall goes in?

Sorry for the noob questions. House is in Canada if it matters (we have optic)

Thanks!

  • silasmoeckel@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Not at least by the terms used.

    A modem converts say cable/dsl/fiber to ethernet.

    A router plugs into that and does NAT to hide your internal network from the world. Technically it’s a firewall but typically misused term is router in home networking.

    A switch plugs into that.

    Wireless AP’s plug into that along with any wired devices.

    Your ISP will often give you one box thats all of these things in one.

    The modem in the basement connected to a router with one more more AP’s around the house. I have 4700 sqf on 3 levels it’s 3 AP’s to get excellent coverage.

    • Sufficient_Manner_91@alien.topOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      That makes sense! Mine is 2200 sqft. I think with modem in the basement and AP on the main-floor via cat, I should be good

      • ScandInBei@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        It depends on the wall materials and thickness. It may not reach the far corners on upper and lower floors.

        You will likely also see significantly reduced wireless speeds. At the moment with best in class wifi you may be able to reach 1.5Gbps near the router, but that could be 200Mbps or less a few rooms away.

        I agree with others that you should run cat6a to all rooms. But atleast run to each floor so you can connected wired access points for better wifi.

        You should never use a wifi extender, and mesh may not work good if distances and building materials attenuate the signal too much. Nothing beats wired for reliability.

      • StillCopper@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        Not even close. Think of everything else you will want hard wired for. Extenders are not worth the trouble if you can get a good wired AP to various locations.