ultimike@lemmy.world to What is this thing?@lemmy.world · 11 months agoMetal, about 1 inch in diameteri.imgur.comimagemessage-square11fedilinkarrow-up158arrow-down12file-text
arrow-up156arrow-down1imageMetal, about 1 inch in diameteri.imgur.comultimike@lemmy.world to What is this thing?@lemmy.world · 11 months agomessage-square11fedilinkfile-text
minus-squareBigFig@lemmy.worldlinkfedilinkEnglisharrow-up5·edit-211 months agoDoes the “lid” screw in or snap onto the top Edit: the hole in the side (tiny hole) should also have something to screw into it
minus-squareultimike@lemmy.worldOPlinkfedilinkEnglisharrow-up2·11 months agoThe lid screws in. There are three holes equidistant around the perimeter. They do not go all the way through.
minus-squareBigFig@lemmy.worldlinkfedilinkEnglisharrow-up4·11 months agoReally? Then my guess is those may be for a tool to hook into for turning. All in all it looks like something pressure line or liquid line related
Does the “lid” screw in or snap onto the top
Edit: the hole in the side (tiny hole) should also have something to screw into it
The lid screws in.
There are three holes equidistant around the perimeter. They do not go all the way through.
Really? Then my guess is those may be for a tool to hook into for turning. All in all it looks like something pressure line or liquid line related