TL;DR - What are you running as a means of “antivirus” on Linux servers?

I have a few small Debian 12 servers running my services and would like to enhance my security posture. Some services are exposed to the internet and I’ve done quite a few things to protect the services and the hosts. When it comes to “antivirus”, I was looking at ClamAV as it seemed to be the most recommended. However, when I read the documentation, it stated that the recommended RAM was at least 2-4 gigs. Some of my servers have more power than other but some do not meet this requirement. The lower powered hosts are rpi3s and some Lenovo tinys.

When I searched for alternatives, I came across rkhunter and chrootkit, but they seem to no longer be maintained as their latest release was several years ago.

If possible, I’d like to run the same software across all my servers for simplicity and uniformity.

If you have a similar setup, what are you running? Any other recommendations?

P.S. if you are of the mindset that Linux doesn’t need this kind of protection then fine, that’s your belief, not mine. So please just skip this post.

  • Alami@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    3
    ·
    1 year ago

    I am not a expert in Linux, and I mostly rely on very strong passwords. I also discovered recently basic stuff like changing the default SSH port. Anyone knows of implementation of 2FA on Linux?

    • PlexSheep@feddit.de
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Changing the default porta is security through obscurity, which is not security but just a waste of time. Don’t rely on attackers “maybe not finding stuff” but rely on your stuff being secure, even if someone had all information about your network and system architecture.

      For 2fa, the other commenter mentioned yubikey pam modules. Those are probably useful, but if you want to secure your ssh server, the best solution is to use ssh keys and disable password login. I can really recommend that as its one of the few things in security that improves both usability and security.

        • PlexSheep@feddit.de
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Welcome to the top of cryptography. We have elliptic curves, crazy math and huge numbers.

      • adam@kbin.pieho.me
        link
        fedilink
        arrow-up
        0
        ·
        1 year ago

        One of the first things my base ansible role does is disable password logins. All keys, all the time.

          • adam@kbin.pieho.me
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Depends on how you like to learn. I’m a doer so I just got stuck in building and bodging things together.

            Plenty of videos about, Jeff Geerling (youtuber who does lots of Raspberry Pi stuff) has a bunch of videos and a book.

            Well worth it though. I couple it with terraform to handle the infra stuff and I can have a basic VPS spun up with a locked down firewall and SSH with a single command and about 5 minutes.

    • ChillPill@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      If at all possible, do not expose things like ssh, RDP, etc to the internet. Use traditional VPN or something like tail scale. Just because ssh is on a different port than normal doesnt mean an attacker couldn’t figure out that your running ssh on port 335.

      • Alami@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        edit-2
        1 year ago

        Well fail2ban went from very active to very quiet. It is definitely worth not leaving 22 (when opening ssh is a must for different reasons)