You can produce 28 aluminium bicycle with motors for the emissions of ONE Citroen C1 or 163 such bicylces for ONE Land Rover Discovery. The numbers for steel framed without a motor is nearly twice as high.
It really does not matter what kind of bicycle you buy, as long as it lowers car usage it is a really good idea enviromentally speaking. Perfect is the enemy of the good.
Sure, but the point is that a ebike with a steel frame is more enjoyable to drive (important factor for wide adoption) and also more sustainable than aluminum frame regular bikes. And there is a reason why people are willing to pay extra for aluminum frames for regular bikes; the extra weight of a steel bike really makes a difference up hill.
there is a reason why people are willing to pay extra for aluminum frames for regular bikes; the extra weight of a steel bike really makes a difference up hill.
It really doesn’t. The extra weight is about 1kg, 1.5kg max, on a total weight of 70-120kg, so around 1% to 1.5% lighter weight to get up hills. E.g. my inexpensive, 30 year old rigid steel mountain bike frame & fork is 7.5lb / 3.4kg. Tire choice and aero are much more significant than weight, typically.
People think the lighter bike is significantly faster, because it feels faster, because it has less momentum under you so surges forward when you pedal, but in reality it’s a tiny percentage. Also, bikes have been marketed on weight. That feeling is great, it’s enjoyable, so it’s not nothing, but it’s hugely exaggerated in people’s mind in terms of journey time or effort.
tl;dr: e-bikes with a steel frame optimized for cost are more sustainable that weight optimized aluminum bikes.
I’m not sure that’s the takeaway since they also talk about the multiple motor and battery replacements an e-bike needs over its lifespan undoing the initial lower emissions to manufacture, or how a well-built aluminum bike can last long enough to offset the higher carbon footprint compared to a poorly made steel one.
It seems the article is really pointing out that cheaply made bikes are the “problem”. Bikes need to be built better (ideally locally so that bigger repairs are then feasible) and have better, more universal serviceable parts. Get more people biking instead of using motor vehicles whenever possible, and stop making the “disposable” tier of bikes so that switch is even more impactful.
tl;dr: e-bikes with a steel frame optimized for cost are more sustainable that weight optimized aluminum bikes.
I’m not sure that’s the takeaway since they also talk about the multiple motor and battery replacements an e-bike needs over its lifespan undoing the initial lower emissions to manufacture, or how a well-built aluminum bike can last long enough to offset the higher carbon footprint compared to a poorly made steel one.
It seems the article is really pointing out that cheaply made bikes are the “problem”. Bikes need to be built better (ideally locally so that bigger repairs are then feasible) and have better, more universal serviceable parts. Get more people biking instead of using motor vehicles whenever possible, and stop making the “disposable” tier of bikes so that switch is even more impactful.
I found this article quite enlightening: https://www.lowtechmagazine.com/2023/02/can-we-make-bicycles-sustainable-again.html
tl;dr: e-bikes with a steel frame optimized for cost are more sustainable that weight optimized aluminum bikes.
You can produce 28 aluminium bicycle with motors for the emissions of ONE Citroen C1 or 163 such bicylces for ONE Land Rover Discovery. The numbers for steel framed without a motor is nearly twice as high. It really does not matter what kind of bicycle you buy, as long as it lowers car usage it is a really good idea enviromentally speaking. Perfect is the enemy of the good.
Sure, but the point is that a ebike with a steel frame is more enjoyable to drive (important factor for wide adoption) and also more sustainable than aluminum frame regular bikes. And there is a reason why people are willing to pay extra for aluminum frames for regular bikes; the extra weight of a steel bike really makes a difference up hill.
It really doesn’t. The extra weight is about 1kg, 1.5kg max, on a total weight of 70-120kg, so around 1% to 1.5% lighter weight to get up hills. E.g. my inexpensive, 30 year old rigid steel mountain bike frame & fork is 7.5lb / 3.4kg. Tire choice and aero are much more significant than weight, typically.
People think the lighter bike is significantly faster, because it feels faster, because it has less momentum under you so surges forward when you pedal, but in reality it’s a tiny percentage. Also, bikes have been marketed on weight. That feeling is great, it’s enjoyable, so it’s not nothing, but it’s hugely exaggerated in people’s mind in terms of journey time or effort.
I’m not sure that’s the takeaway since they also talk about the multiple motor and battery replacements an e-bike needs over its lifespan undoing the initial lower emissions to manufacture, or how a well-built aluminum bike can last long enough to offset the higher carbon footprint compared to a poorly made steel one.
It seems the article is really pointing out that cheaply made bikes are the “problem”. Bikes need to be built better (ideally locally so that bigger repairs are then feasible) and have better, more universal serviceable parts. Get more people biking instead of using motor vehicles whenever possible, and stop making the “disposable” tier of bikes so that switch is even more impactful.
I’m not sure that’s the takeaway since they also talk about the multiple motor and battery replacements an e-bike needs over its lifespan undoing the initial lower emissions to manufacture, or how a well-built aluminum bike can last long enough to offset the higher carbon footprint compared to a poorly made steel one.
It seems the article is really pointing out that cheaply made bikes are the “problem”. Bikes need to be built better (ideally locally so that bigger repairs are then feasible) and have better, more universal serviceable parts. Get more people biking instead of using motor vehicles whenever possible, and stop making the “disposable” tier of bikes so that switch is even more impactful.
Open source bike and parts on a steel frame.
Or find old steel frame bikes?