Hi everyone. I’m looking into my first 3D printer and would like a resin one for the great detail it can produce. I’m looking for companies that make respected machines that aren’t out of China. I know of Prusa but their resin printer is incredibly expensive for me and a beginner.

As a second note, I would love to support a USA company as a first choice if available and like the software and firmware to be open source. I’m happy to have found PrusaSlicer with UVtools so there’s one less Chinese/semi proprietary/subscription based software.

  • Kale@lemmy.zip
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    Even with moderate usage, no joke, I’d recommend getting a flammables cabinet to store IPA. At the end of every weekend, I drain our washing station back into two three liter jugs and put them in the flammables cabinet. I drain them while the washer is running to get the solid stuff out of the washer. They’re stored correctly, the cabinet prevents light from reaching the jugs, and the solids settle to the bottom of the jugs over the weekend. On Monday I carefully pour the top portion into the auto washer and top it off with new IPA. The settled layer gets poured into the waste container.

    We have two printers at work, one wash station and one cure station. And we have 8x jugs of IPA in our flammables cabinet.

    Before we started settling in the cabinet and decanting our wash solution, we went through an incredible amount of IPA that we had to deal with as waste. And this is from two SLA printers, which we use in addition to our Prusa MK3 and SLS nylon printers, so we don’t always use the resin printers.