I have a 2012 GAZP7 that is still chugging along nicely, except for the fan noise and heat :) Other than that, I love it.

I’m looking to upgrade the memory from 16 GB to 32 GB. I know this is possible, and dmidecode shows there should be 4 slots, but I only see 2 when opening up to the motherboard.

I also don’t see where the second hard drive is…

Advice is welcome.

# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

Handle 0x0018, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x0016
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 8 GB
	Form Factor: SODIMM
	Set: None
	Locator: ChannelA-DIMM0
	Bank Locator: BANK 0
	Type: DDR3
	Type Detail: Synchronous
	Speed: 1600 MT/s
	Manufacturer: 8502
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: PSD38G16002S
	Rank: 2
	Configured Memory Speed: 1600 MT/s

Handle 0x001A, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x0016
	Error Information Handle: Not Provided
	Total Width: Unknown
	Data Width: Unknown
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM1
	Bank Locator: BANK 1
	Type: Unknown
	Type Detail: None

Handle 0x001B, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x0016
	Error Information Handle: Not Provided
	Total Width: Unknown
	Data Width: Unknown
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM0
	Bank Locator: BANK 2
	Type: Unknown
	Type Detail: None

Handle 0x001C, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x0016
	Error Information Handle: Not Provided
	Total Width: Unknown
	Data Width: Unknown
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM1
	Bank Locator: BANK 3
	Type: Unknown
	Type Detail: None

​

dmidecode

​

(Yes, I\"m going to dust this thing off…)