This isn’t strictly “homelab” related, but I’m not sure if there’s a better community to post it.

I’m curious what kind of real-world speeds everyone is getting over their wireless network. I was testing tonight, and I’m getting a max of 250Mbit down/up on my laptop. I have 4 Unifi APs, each set to 802.11ac/80Mhz, and my laptop supports 2x2 MIMO. Testing on my phone (Galaxy S23) gives basically the exact same result.

The radio spectrum around me is ideal for WiFi; on 5Ghz, there is no AP in close enough range for me to detect. With an 80Mhz channel width, I can space all 4 of my APs so that there’s no interference (using a non-DFS channel for testing, btw).

Am I wasting my time trying to chase higher speeds with my current setup? What kind of speeds are you getting on your WiFi network?

  • Domi@lemmy.secnd.me
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    4 months ago

    I get 700/500 on my Unifi U6 Enterprise (4x4 MIMO, 80 MHz, 5 GHz) and 500/500 on my Unifi AC Pro (3x3 MIMO, 80 MHz, 5 GHz).

    Could probably get some more on 6 GHz but I never was able to get it to work properly.

    • corroded@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      What devices are you using that support 3x3? My APs are set to 3x3, but every device I have ever tried only connects at 2x2.

      • Domi@lemmy.secnd.me
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        4 months ago

        I don’t think any of my devices are using more than 2x2 either, that is just the maximum of the access points.

        The speeds I get are on a Fairphone 5 with 2x2, at most a room with drywalls away.