I need some help finding a distro for a very old machine.
It’s my family’s old desktop with 2001 components (bought in 2004) and a Pentium CPU that is NOT i686. I checked the exact model and architecture once but I don’t remember it now. The only thing I remember is that it’s not i686 so 99% of modern 32 bit distros don’t work on it (stuck right after grub).
The machine has 1 Gb of DDR1 RAM though so I think it may be useful or at least fun to play around with.
Now it’s on Windows XP that runs quite well but doesn’t support modern SSL certificates so it can’t browse the internet (idk how to fix it ok?).
A long time ago I tried to run multiple distros in live mode on it and got only one (Puppy) to work. Display, sound, ethernet and pretty much everything worked fine. GPU seemed to be an issue though because NVidia and I couldn’t install the driver (it was skill issue and I think it’s possible to do). But now it doesn’t work for some reason.
Are there any Linux distros or other operating systems (preferably not deprecated) that I can install on it? And btw it does have bootable USB support.
EDIT: There are way too many answers and a lot of ones that don’t mind the architecture limitations. I’m grateful to everyone who replied but I have to close this discussion now and I will not reply to further answers. I have received enough information and I cannot physically read so many replies.
There’s gentoo options for a lot of older architectures. I even got it running on a 32bit power machine.
Back in the day gentoo meant compiling everything from source, but nowadays there’s precompiled binaries.
If you’re doing the evanescence routine on older hardware, check to see if there’s cheap ram and ssds available that work with its interfaces. Usually the trick with pata is to use old cf to sata adapters because cf is pin compatible with the little pata interfaces they’d put on laptops.
Consider cleaning and reapplying thermal paste to the cpu. You won’t even need to take it out of the socket, just don’t dump isopropyl all over the board while cleaning.
If your old computer has a cool old sound card there’s never been a better time to use a tracker that takes advantage of its built in synthesizer!
I agree that Gentoo will probably work, as it still has functional i486 support. Be aware that you may be spending a lot of time compiling if you go that route and don’t have a second, faster machine to use for distcc or the like.
As for the nvidia card, the proprietary driver won’t work for something of that age. Check the supported cards in Nouveau (and maybe even the really old drivers for prehistoric cards). In a pinch, the vesa driver should work. Good luck.
That was one of the best deep-cut comments I have read in a while! The helpful advise to OP was also nice. lol