I am using a somewhat minimal installation of Arch-Linux on Nvidia-Hyprland. I am using the base install of Discord and I have PipeWire installed with Easy Effects running, along with some EQ settings for my BeyerDynamics DT 770 80ohm headphones. Every time I join a call in Discord, all the sounds are crackling until I leave. I have restarted PipeWire multiple times and I have disabled my Easy Effects settings and fully closed the application, but the issue persists. I appreciate any help I can get. I’m not very knowledgeable when it comes to Linux.

    • Miyabi@iusearchlinux.fyiOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I am reading the wiki, but it is mostly discussing PulseAudio and not providing much information about PipeWire. I am unsure whether they share similar file locations or configuration processes, and I do not want to arbitrarily paste PulseAudio commands without knowing their potential effects.

      • mvirts@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Pipe wire is designed to mimic pulse audio and Jack, but it is written from scratch I believe. Pulse audio configuration programs mostly work for pipe wire, like pavucontrol.

  • Bigbon@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Had the exact issue after whatever pipewire update, fixed it by switching to pulseaudio. Was really trying to find different solution, one thing works temporarily(and I mean it, sometimes it fixed the issue for 1 minute sometimes for the entire session) is to switch audio profile to pro mode(if on kde at least)

  • Elkenders@feddit.uk
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Sorry not a Linux specific thing but possible a sample rate conflict? If you’re able to test/toggle between 48k and 44.1 that might be worth trying.

  • RekTech@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Ran into a similar problem on Ubuntu a while back, was the sound card being put into power saving mode by default. Maybe worth checking if you can turn off any power savings with your install.

      • Miyabi@iusearchlinux.fyiOP
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        1 year ago

        According to the Arch Linux wiki, power-saving mode for my audio card is disabled by default. I have not enabled it yet, therefore it is not currently available as an option.

  • mvirts@lemmy.world
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    edit-2
    1 year ago

    It’s probably the pipes, but may also be the wires 😹

    I would open up QJackCtl and see if you get and Jack messages, since pipe wire has a jack interface as well. Idk if that actually makes sense, but I would definitely do it. Oh also obviously disable the eq and see if it changes. Wait no not the eq, the effects. Are your headphones Bluetooth?

    • Miyabi@iusearchlinux.fyiOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      My headphones are not Bluetooth, and I have already disabled the EQ. Disabling the EQ has not fixed my problem; it has only made the sound slightly more bearable.

        • mvirts@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I’m afraid I only use discord for chat, but it doesn’t cause audio problems for me, at least not that I’ve noticed.