Debian 12. HP Laserjet Professional P1606dn

If it prints at all, it prints the top inch of the test page or just random binary. I have tried the recommended driver, the driverless driver, the Generic PCL 4/5 driver, the Generic PCL 6 driver. And probably others I am not remembering.

I am trying to print over Ethernet, but I am about to drag the printer over near my desk and print via USB.

Fortunately, I don’t have actual critical printing to do right now and I am only setting up a printer after installing Debian 12. BTW this means it is a fresh install of Debian 12 too.

I have been helpdesk support at a data center. I would not consider myself a dummy, but this is getting ridiculous. A task that should have taken all of 10 minutes has taken over 2 hours so far.

How are we ever going to get “The Year of Linux on the Desktop” if simple printing is and continues to be such a pain?

  • qwesx@kbin.social
    link
    fedilink
    arrow-up
    25
    ·
    edit-2
    1 year ago

    You’re supposed to use hplip for HP printers. There’s a Debian package for it in the main repositories.
    edit: You can look up the printers and supported features with hplip here. Looks like your printer is perfectly supported (as long as you let hplip’s tray program install their proprietary driver plugin).

    • WasPentalive@lemmy.oneOP
      link
      fedilink
      arrow-up
      6
      ·
      edit-2
      1 year ago

      I will try that. Thanks! I am not sure what features I don’t get to use because of the USB/Generic PCL printer setup I have now.

      • WasPentalive@lemmy.oneOP
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        That was worse - the test page failed with “filter failed”, went back to “Generic PCL Laser Printer”, and was able to print a full Debian test page again.

        • qwesx@kbin.social
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Have you installed the plugin within hplip, or rather, the hplip-GUI program? Have you removed the old printer from CUPS before trying?

          • WasPentalive@lemmy.oneOP
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            I don’t really understand the CUPS web interface at localhost:[cups port] but I am removing the printer from the control panel and ensuring it disappeared over a reboot. I installed the hplip package using apt. I don’t know if it brought a GUI along with it. I have been interacting with things using the settings app.

            • qwesx@kbin.social
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              What settings app? hp-toolbox is the program to use (which might in your applications menu as “HP Device Manager”), alternatively hp-setup to set it up from the CLI.

  • words_number@programming.dev
    link
    fedilink
    arrow-up
    16
    ·
    1 year ago

    Rage against the machine never specified what kind of machine they meant. Now we know it was probably a printer.

    Sorry, I know this is not helping, but I love that joke :D

  • WasPentalive@lemmy.oneOP
    link
    fedilink
    arrow-up
    7
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Update = Connecting the printer via USB gave better results. I would rather talk to it via the existing ethernet, but I did have a long USB cable so at least I don’t have to give up half my desk. The printer is still connected to the network too. perhaps my wife can use it from windows.

    At least for now I can print.

    • itsYaBoyNoodles@beehaw.org
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Glad you could get it working over USB. In case you’re still pursuing a network solution: What’s your network topology and can your wife print over Windows?

      • WasPentalive@lemmy.oneOP
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        She is currently rocking a very expensive-per-page Xerox color laser printer in her office, but next time we have to buy toner for that beast . . . She does not need color. The network is a single SOHO switch-based gigabit ethernet connected to the AT&T uverse router. Printing would not have to traverse any router. Now if the printers have to phone home, they will have to deal with carrier grade NAT, or use IPV6.

  • merthyr1831@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    I know this doesn’t help, but my linux experience has been good regarding printers. Much easier than Windows ever was. Probably just luck tho

  • owatnext@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I’ve always just sent the docs to my phone over bluetooth and then printed from my Android phone. I rarely get printing to work on Linux.

  • Johannes Jacobs@lemmy.jhjacobs.nl
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    To be fair, printing on Windows isnt all roses and sunshine either :) Printing in itself is an issue. I remember how happy i felt when the big tech started talking about the paperless office and all…

    I’m still waiting, and praying for that day to come :)

  • InFerNo@lemmy.ml
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I have a network connected hp officejet. If you want I can check my settings and drivers in CUPS tomorrow so you can compare. It has been working with several computers for quite a long time now and it gets auto discovered by windows and Linux.

    I use ink from a 3rd party seller and it’s relatively nag free since it’s pretty old. It warns about non authentic ink, but then works just fine.