Last year, I had my mirrors tested optically because I was never 100% content with even my “sharpest” results - there was always a feeling that there was an unnecessary bit of blur in the raw data.

Happily, the 20" mirror itself turned out to be quite good (not perfect, but at Strehl 0.89 and lambda/10 it is completely within spec and not worth refiguring) - however, the secondary turned out to show a frankly ridiculous lambda/2 (!) astigmatism. Since it was also on the small side for use in deepsky imaging (4" mirror on a 20" F/4 scope) I opted to replace it with a 5" diagonal from Ostashowski optics. The terrible weather in Western Europe in the last 6 months prevented me from doing any real testing (or even reinstalling the telescope in the observatory…) until now.

However, the 19th & 20th of March were finally “good” - good seeing (by our local standards…) and on the 20th, transparent skies.

This allowed me to finally stretch the renewed scope’s legs a bit, resulting (among a mass of other still to be processed data) in this 62 megapixel mosaic of the Lunar North pole at 0.08"/pixel

Check out the full resolution image on https://www.flickr.com/photos/bartcentral/53618375534/sizes/o/

      • DessertStorms@kbin.social
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        8 months ago

        Wow, that’s so cool! I’d love to have a setup even half that impressive (I have none currently lol and am renting, so anything on this scale is not an option, but one can dream!).
        The photo is great too! lol

      • Gnomie@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        That is a very sturdy observatory. Did you manufacture all of the metal parts yourself?

        • bdeclerc@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          3
          ·
          8 months ago

          No - found a local metalworker (specialising in metal staircases and metal gates for properties) - the design was based off of a wooden concept designed by an engineer friend with astronomy experience. Because of the type of scope and mount, I wanted a low wall and not just a roll-off roof. I got inspiration from a local public observatory which has a big observation platform housing a 24" scope and a bunch of others where the entire roof and sidewall rolls back, but the final design is very different - I’m super happy with it, it’s extremely sturdy yet can be opened with one hand.