What is the best, money is no factor solution for monitoring home energy. The goal is no cloud. I was using a zwave solution however it keeps falling off the network and now I cant get it back on. Looking to upgrade.

Edit: I live in the states.

  • dmtalon
    link
    fedilink
    English
    arrow-up
    10
    ·
    9 months ago

    I have two Emporia Vue 2s one in each 150a panel, flashed with esphome so they’re only reporting locally and it works great. 16 circuits per vue.

    • rusticus@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      Can you sum the data or do you have to run it as 2 different systems?

      • dmtalon
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        I add them each as their own entities but they are automatically totalled after that. You can see in my image left and right main. That’s each Emporia

    • tjhart85@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      Same, but the Vue 1.

      Works very well by my panel looks a fuckin’ mess because of it!

      OP, it’s not ‘money is no object’ because it’s actually pretty cheap, but it’s actually very easy to flash and install, so, if I were to do it again, I’d probably choose the same hardware since it went pretty smoothly.

  • CondorWonder@lemmy.ca
    link
    fedilink
    English
    arrow-up
    5
    ·
    9 months ago

    I use an Emporia Vue device, it uses an ESP32 internally and you can find instructions on how to flash it with esphome code onto it. No cloud dependency, just wifi.

    You can get various kits for one/two/three phase mains, and monitor up to 16 individual circuits via passive current clamps.

    • BOFH666@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      Thanks for the tip! Installed a Flukso meter several years ago, but it looks like the project is eol.

      Always great to have an alternative option.

  • Bp#9@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    9 months ago

    I can recommend BrulTech. I put in a system (3 GEM’s and a Dashbox logger) to cover 3 full panels (plus water, gas, and temps) about 2 years ago and I’ve been very happy with it.

    Quick review: It’s all local and is well documented and open at the integration level - with HA there’s already an integration built in for it out of the box (I recommend getting the latest from github as they are actively developing it). Firmware is proprietary but low level (read sensors, send via serial->ethernet convertor, sleep 5 secs, repeat; configuration UI). Support is technical and high quality, install/setup docs are excellent and give good examples setting up and and configuring the CT’s.

    My setup: I have the dashbox set up to proxy the raw GEM data to HA’s Brultech integration which then feeds all the HA power/water/gas/temp features. The GEM’s I have read 32 CT channels each, plus have 8 ‘counter’ inputs (gas, water) and several 1wire bus I/O’s to talk to temperature sensors. They send a data snapshot of all readings every 5 seconds to the logger and to HA (greatly filtered).

    The dashbox and 3 GEM’s are on wired ethernet, they also have integrated WIFI as an option. They talk on my local net between each other and the dashbox pushes messages to HA - nothing talks to anything on the internet or needs any connectivity to set up.

    The HA integration reads GEM-packets, the dashbox repeats the packets received from the 3 GEM’s to the HA integration in my setup - but you can also skip the dashbox and just point the GEM straight at HA.

    Some examples from the data logger dashboards:

  • walden@sub.wetshaving.social
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 months ago

    I just got a 6 channel from Circuit Setup and it’s pretty great. I still want to do some tweaking to make sure it’s calibrated but so far so good. I’m waiting for some smaller current transformers to come back in stock.

  • amigan@lemmy.dynatron.me
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    9 months ago

    I have the aeotec zwave HEM that I imagine you are talking about, and have been using it for 4 years. Mine is on its own zwave modem, separate from the one I use for everything else, but you can also try increasing the reporting intervals, and maybe disabling reporting for anything you don’t care about.

      • amigan@lemmy.dynatron.me
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        Yes. It generates a lot of traffic. Once you get it reporting reliably, I struggle to see the benefit of a more expensive solution unless you want more channels.

        • calmluck9349OP
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 months ago

          Channels would be nice. Its just annoying at this point to have to keep resetting it. Makes the logs useless.

    • Passerby6497@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      I picked up a couple of these recently for the wrong purpose (wanted to attach to standard power plug not line voltage), and am struggling to figure out how to do the line/neutral setup on my box.

  • pdavis@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    9 months ago

    I have two IoTaWatts (https://iotawatt.com/) for all the circuits in my home. I also use Z-Wave and Zigbee devices to monitor individual plugs (I love these). I send data from all of this to an InfluxDB database and then into Grafana for displaying pretty graphs. Everything is running on my Windows desktop. The IoTaWatt doesn’t require internet access to work. I have been very happy with the setup and once setup it hasn’t required much maintenance.

    The system is also good for recording temperatures, solar power information, and anything else that can make an API call. Not sure why your Z-Wave is falling off the network, for that I use a Hubitat and mostly Inovelli, Zooz, and THIRDREALITY ZigBee plugs.

    • rusticus@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      I too have IoTaWatts. But they are out of business so not really an option for anyone else.

      • SoNick@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        They appear to be available for order right now? I didn’t enter payment details, but kits are in stock.

        • rusticus@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 months ago

          Thank you I stand corrected! The owner definitely closed his business a few months ago but must have resumed.

  • deafboy@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    9 months ago

    The utility meter provided by the distribution company has an LED indicator reporting the consumption. I use this zigbee device which converts the LED pulses to a numerical value, and sends it to homeassistant.

    • calmluck9349OP
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      So this unit goes on the meter? That sits outside??

      • deafboy@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        Yes, on the outside meter. It comes with a magnet with a double sided tape which you place around the LED, and the sensor itself just hangs on the magnet. But I’m not sure if american meters provide such interface.

        I’ve asked the utility provider for some kind of official, approved, solution, but all they have to offer was to replace the entire meter, and even that would only report a 15 minute average via some proprietary API. The frient device is clearly a better solution. No wonder they were sold out for months.

  • dan@upvote.au
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    9 months ago

    If you live somewhere where the electricity company supports it, you can use the Emporia Vue Utility Connect, which is a $40 device that wirelessly connects to the electricity meter. https://www.amazon.com/Connects-Electric-Metering-Burlington-Mountain/dp/B084T6HGNR. Your electrical meter must be a “smart” one that supports Zigbee SEP and your electricity company must allow customers to connect their own Zigbee SEP devices to the meter. I’m in Northern California using PG&E and it works great.

    This just measures whole-house usage rather than individual circuits, but it’s still useful.

    To measure individual circuits, you can use the regular Emporia Vue. This is a device you install inside your electrical breaker panel, so you may want to get an electrician to do it if you’re not comfortable in there. They’re releasing a new version of it at some point though, so the current version should go on sale at some point too.

    Since you mentioned “money is no factor”… Several solar systems allow you to monitor power consumption. I use an Enphase IQ8+ system and it allows monitoring of both production (how much solar power is being produced, both overall and per panel) and consumption (how much power the house is using, either via solar or from the grid).

  • SayCyberOnceMore@feddit.uk
    link
    fedilink
    English
    arrow-up
    1
    ·
    9 months ago

    Not sure where you are in the world, but I’m using OpenEnergyMonitor

    Personally, I’m using their Raspberry Pi version (EmonPI) to monitor my total house energy - grid in, solar in and solar export and pull the data directly into HA.

    But there’s other options available too, like the 6-channel monitoring, so you could potentially monitor separate circuits and / or high energy systems like heatpumps, etc. They have options for 3-phase too…

    In my case, power in AND power out to the grid both flashed the LED on the supply meter (mentioned elsewhere here), so I had to go with CT sensors which I put inside the consumer unit… had a little trouble with calibration due to the electrical noise in there, but +/- a few W is nothing when I have to heat my home with electricity at 4kW+