GitHub - TA1EEI/vhf-morse-transmitter-monitor: Set your radio to 148.500 MHz, select FM, USB, or CW mode, and set the squelch to 0 or 1. Then, extend your radio's antenna toward the monitor's HDMI port, and congratulations—you can now transmit in Morse code directly from your monitor!
github.com
Set your radio to 148.500 MHz, select FM, USB, or CW mode, and set the squelch to 0 or 1. Then, extend your radio's antenna toward the monitor's HDMI port, and congratulations—you can now t...