For a long time now, I’ve had audio drops and sometimes even keyboard input drops through my KVM switches.
When a drop occurs, all audio across all applications drop at once. If there’s a video playing then it’ll pause briefly. In a game, I just miss a second of audio with no video stuttering.
When I connect my USB speakers directly to my motherboard then the issue does not occur; only through the KVM switch. I was using this decent switch I got off Amazon but just replaced it with one from Level 1 Techs and the issue remained. I’ve tried different ports on the switches and my board as well.
The issue also only occurs on my Linux computer. When I switch over to my work laptop running Windows I don’t have the issue.
I’m not seeing anything in journalctl that seems related after swapping KVM switches. With the old switch I was seeing logs like below but no longer see that with the new switch.

kernel: retire_capture_urb: 1 callbacks suppressed

My PC
CPU: AMD Ryzen 9 7950X
Motherboard: Asus PRIME X670E-PRO WIFI
Memory: G.Skill Ripjaws S5 64 GB (4 x 16 GB) DDR5-5600 CL28
GPU: Gigabyte GAMING OC Radeon RX 6900 XT 16 GB
Kernel: 6.8.1-arch1-1
DS: Wayland 1.22
DE: Gnome 45.0.1
AS: Pipewire
SM: Wireplumber

  • Goku
    link
    fedilink
    33 months ago

    Have you tried another OS on the same hardware to rule out hardware issues?

    • Lars
      cake
      OP
      link
      English
      1
      edit-2
      3 months ago

      I don’t get any audio drops on my work laptop running Windows
      Tried different KVM switches
      and different ports
      with all of the same devices connected but my speakers connected directly to my computer then I get no drops

      • Goku
        link
        fedilink
        33 months ago

        So the answer is no, you didn’t try another OS on the same hardware. Likely could be hardware issue.

  • @Peffse@lemmy.world
    link
    fedilink
    23 months ago

    Are either KVM powered by an AC adapter or are they riding off the 5v rail of your PC?
    I had a very similar problem and found that the 5v on my PSU was going bad, and as devices powered down/up the KVM would vanish for a second and reconnect.

    • Lars
      cake
      OP
      link
      English
      33 months ago

      The first one was powered by 5v off a dedicated usb charger. The new one uses an A/C adapter

  • @baru@lemmy.world
    link
    fedilink
    23 months ago

    Sometimes the different USB ports are backed by different manufacturers. Pretty much all of my USB outputs are a bit unreliable. Apparently a hardware issue. There are two that use a different chipset. Those are the only reliable ones.

    So maybe check the various USB ports to see if there’s a difference.

    • Lars
      cake
      OP
      link
      English
      23 months ago

      I’ve tried various ports on the motherboard and when directly connected to the same ports that the KVM switch was then there was no issue. I’ve been wanting to replace my kinda crappy board anyways so maybe the new one will fix it whenever I get around to it. I think I’m going to try to just use 3.5mm cables instead of USB and hope it works fine over the KVM switch. Just ordered a few.