Seen a few articles where people have replaced the elastomers in other pedal sets with springs, has anyone done this with Sprints? I’m feeling to do this based on steel springs being more durable than rubber blocks.

Looked into it a little myself, but this isn’t my area and not really sure what id be looking for.

  • mranderson17
    link
    fedilink
    English
    arrow-up
    2
    ·
    10 months ago

    Not sprints, but I did something similar with my ultimate+ set. I didn’t replace all of them, only 1, and the other spring is there in the original set. This produces a feel more like what is in my real street car with a brake booster where there is some pedal travel and then sudden increase in resistance.

    Not quite what you’re asking about but figured it might be helpful.

    • WeThePilgrims@sopuli.xyzOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Thank you.

      Aye was a rushed post, I’m looking to do this but not sure what type of springs I should be looking for, so guess the question should have been ‘has anyone done this and what springs did you use’.

      I’ve looked around for things like upgrade kits and whatnot without success, so think I’ll have to…you know, buy a spring off eBay… I’ve no idea where to begin.

      • mranderson17
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        In this picture I used a valve spring from a 1991 Ford Escort. I’m not sure this is ideal for this purpose, but I had a small pile of them in my parts bin so I figured it was worth a try. Since brake feel in sim-racing seems to be more about personal preference than reality (read some threads on that subject… it’s a rabbit hole) I would guess you’ll need to buy many springs and experiment a bit.

        Maybe you could find a local to you industrial or hardware supplier and pick up a few?