It’s the trace going towards the mode button, so I’m pretty sure resistance won’t exactly be critical over a ~3mm gap, as long as it recognizes when the plunger button is pressed down.
It’s the trace going towards the mode button, so I’m pretty sure resistance won’t exactly be critical over a ~3mm gap, as long as it recognizes when the plunger button is pressed down.
Look for the channel of Robert Murray-Smith. He has tons of videos on diy conductive ink.
Man, I got lost in a different world last night, watching his videos about 3D printing and gearboxes and stuff, good stuff 👍
But do you have any particular link where he covers conductive ink/paint? Most everything I’m seeing is all mechanical contraptions.
His earlier videos are all about conductive ink
Ah, gotcha. I’ll keep that in mind and double check his channel later this evening.
Here is a basic one https://www.youtube.com/watch?v=q32Fr0Hh84o