akilou@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 9 months agoHow do I clean this mess?imagemessage-square28linkfedilinkarrow-up178arrow-down12
arrow-up176arrow-down1imageHow do I clean this mess?akilou@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 9 months agomessage-square28linkfedilink
minus-squarenomadlinkfedilinkEnglisharrow-up5·9 months agoUse a knife and carefully scrape off what you can while cold. Heat to printing temp and wipe off what you can. Cool down and clean with acetone if need be. Edit: do this only with metal pieces. Disassemble head if need be.
Use a knife and carefully scrape off what you can while cold. Heat to printing temp and wipe off what you can. Cool down and clean with acetone if need be. Edit: do this only with metal pieces. Disassemble head if need be.