• derek
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    4 days ago

    How? What mechanisms, conditions, etc, are we manipulating which produce such a significant effect? After a bit of searching I found this write up:

    https://thor3d.ca/wp/the-effects-of-print-orientation-on-strength/

    Is this what we’re referring to? To summarize (if I’ve understood this properly): Printing at 45 degrees ensures none of the print’s three axes are aligned with the printer’s least accurate axis of movement.

    • antimongo@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 days ago

      Similar, but I believe the strength addition is also because it changes the directions of the Z-axis layers.

      Most filament is rather strong in tension. If you imagine printing a regular cube, without rotation, it’s going to be strongest stretching or compressing the sides of the cube.

      But if you pulled the cube apart from its top and bottom, the only adhesive strength is the fused connection between layer heights. Which is super weak.

      By printing at an angle, the layer heights may be in a direction that doesn’t receive tensile load, making it functionally stronger.